|Control System:||IGBT||Application:||Crankshaft Heating|
|Duty Cycle:||100%||Work Principle:||Electromagnetic Induction Heating|
|Work Power:||380V 3phase||Warranty:||One Year Warranty|
Two Stations Induction Scanner Tool,
100KW Induction Scanner Tool,
80KHZ Shaft Gear Hardening Machine
Two Stations PLC Control Induction Scanner Tools For Shaft Gear Harden
Induction Hardening Machine,Induction Hardening Machine price,Induction Hardening Machine equipment,Induction Hardening Machine manufacture,Induction Hardening Machine companies.Induction Hardening Machine for sale
Induction hardening is a form of heat treatment in which a metal part is heated by induction heating and then quenched. The quenched metal undergoes a martensitic transformation, increasing the hardness and brittleness of the part. Induction hardening is used to selectively harden areas of a part or assembly without affecting the properties of the part as a whole.
1.Quenching time is short, parts of the HRC value can be adjusted.
2.The workpiece rotation set any speed of any interval to meet the coaxial diameters different.
3.Quenching range size accurately.
4.Part layer deep meet the technical requirements, similar to non-oxidative quenching (if required can also be quenched in the protective atmosphere).
5.Low quenching deformation.
6.Reproducible well in the process.
7.Easy to quench multiple local of workpiece.
1. Full protection functions such as over current, over voltage, voltage limiting, current limiting, over frequency, temperature protections etc..
2. The power supply is PLC controlled which can be connected to the quenching lathe.
3. The quenching lathe is compact and adopts standard structual steel type.
4. Various quenching type: continuous scanning quenching, timing quenching, segment scanning etc.
5. This machine is adapted to automatic work which is of high production effect, low operation cost. The control system adopts PLC which can control all data.
6. The control system can monitor the quenching speed, heating power, quenching liquid pressure as well as cooling flow.
7. All the quenching parameters can be stored and invoked up as customer's will.
Induction Heating Machine Equipment GY-100AB Parameter
|Model||GY-100AB (Three phase)|
|the flow rate of cooling water||0.08-0.16Mpa 10L/Min|
|water temperature protection point||40C|
|product size||main : 820x600x1060 mm|
|transformer : 870x430x750 mm|
|net weight||main : 110 kgs|
|transformer : 79.5 kgs|
Delivery Time: within 7 workdays.
Shipping Term:By sea,By air,by express.
Extra accessories accept choose
2>Customer design Coil
4>Back-up Electronic Boards
5>Forging Furnace,Melting Furnace,Hardening Fixture
|Induction Heater Power Require depends on following factors :|
|»||Mass of work piece||»||Material properties of work piece|
|»||Temperature increase you require||»||Heating time require|
|»||Effectiveness of coil design||»||Comprehensive full load design|
|»||Any heat loss during heating process|
Induction Heater Application
Induction Heater After service
Q: Why choose GuangYuan Company?
A: We are manufacture which had in this filed for nearly 20 years.No matter quality,
price,service,delivery time,we all have large advantage.
Q:How to choose suiteble machine?
A:You can tell us your application,need forging,hardening,welding,melting or other,
pass me workpiece material & size,Temperature requirement and heating time requirement.
Then we will recommend fit machine for you reference.
Q:How about the machine payment term&delivery time&Shipping term?
A: Our company payment term accept T/T,Western Union,L/C and so on.Small machine delivery
time is 3~7 workdays.Big machine delivery time 15~25 workdays.Shipping term accept EXW,FOB,
CIF and so on.
Q:How about the machine warranty?
A:Our goods support one year warranty not by personal purpose,support technical service all life.
During the warranty,if machine have problem need change spare parts,we can replace for you charge free.
CALENTAMIENTO P/INDUCCION,HORNO DE INDUCCION,MAQUINA DE CALENTAMIENTO
LOS DEMAS APARATOS PARA TRATAMIENTO TERMICO DE MATERIAS POR INDUCCION O PERDIDAS DIELECTRICAS
Contact Person: Cherry